It’s quick to make, beginner-friendly, and has been around in various forms since at least the 1960s.

The version we’re folding here is the standing crow, elegant and slightly ominous, great for Halloween or as a minimalist decoration.

Kami paper works well, but for a sharper silhouette and more structure, I recommend Tant paper in black or dark grey.

You can perch your crow on an origami cube like in our photo, or let it loom from the edge of a shelf, a branch, or a basket.

Traditional Origami Crow Step-by-Step Instructions

• Difficulty: Easy – Beginner Level 3
• Folding time: 5 minutes

Step 1

Start with the colored side facing up. Fold and unfold along both diagonals.

Step 2

Turn the paper over.

Step 3

Fold and unfold side to side in both directions.

Step 4

Collapse along the existing creases to form a Square base.

Step 5

Fold the bottom edges to the centerline.

Step 6

Fold the top corner down. Crease where the layers intersect.

Step 7

Unfold Step 5.

Step 8

Petal fold the bottom corner upward (one layer only), using the existing creases.

Step 9

Repeat Steps 5 to 8 on the other side.

Step 10

Fold the top flap downward.

Step 11

Turn the model over.

Step 12

Fold the bottom left corner (top flap only) outward to the left. Crease well, then unfold.

Step 13

Inside reverse fold along the creases to form the first crow’s foot.

Folding tip: Try to fold the foot so it’s parallel to the vertical centerline.

Step 14

Repeat Steps 12 and 13 on the right side.

Step 15

Fold the model in half from right to left.

Step 16

Fold the top corner to the left. Crease well, then unfold.

Folding tip: There’s no exact reference point here, so fold it however looks good to you.

Step 17

Inside reverse fold along the creases to form the crow’s head.

Your Origami Crow Has Landed

We hope your crow turned out beautifully, and maybe even found a spooky perch somewhere in your home.

Whether you’re folding origami for Halloween, decorating a reading nook, or just enjoying a quiet moment with paper, this model is a fun and satisfying little project.

If you enjoyed this one, don’t forget to subscribe to our YouTube channel for more tutorials, and join our newsletter for free diagrams and seasonal ideas.

Download the Complete Origami Crow Printable PDF Instructions

This printable PDF is part of our Origami Friends membership on Patreon. As a member, you get access to these diagrams, our full library of printable PDFs, and member-only content.

Become an OrigaMi Friend

The post How to Fold an Origami Crow appeared first on Origami.me.

With a few clever folds and some simple color changes, you’ll see the pumpkin’s mischievous face appear step by step, no tricky folds required.

You can fold the pumpkin in less than 5 minutes, and it looks great in classic orange with a contrasting color on the back.

Try purple, black, or even gold for a festive twist.

Origami Jack O’ Lantern Step-by-Step Instructions

• Difficulty: Easy – Beginner Level 2
• Folding time: 5 minutes

Step 1

Start with the white side of the paper facing up. Fold in half vertically, then unfold.

Step 2

Fold the top edges to the centerline.

Step 3

Fold the top edges to the centerline again.

Step 4

Fold the two flaps sticking out at the bottom upward.

Step 5

Fold the right part bottom edge up to where the colored and white sides meet.

Step 6

Fold the model in half. Only crease the bottom part, then unfold.

Step 7

Unfold Step 5.

Step 8

Repeat Step 5 on the left side.

Step 9

Repeat Step 6.

Step 10

Gently open the bottom flap as shown and fold the bottom right corner up along the existing crease. Part of the flap will shift to the left.

Step 11

Fold the flap you just made along the existing creases. This time, move it to the right.

Step 12

Repeat on the left side, then squash fold the top flap to flatten.

Folding tip: Use the crease lines to help center the flap before squashing.

Step 13

Fold the top flap’s right corner down along the dashed line.

Step 14

Repeat on the left side.

Step 15

Turn the model over.

Step 16

Fold the top corner down.

Folding tip: Flip the model over and adjust the fold until you like the pumpkin’s shape. This step decides the overall look!

Step 17

Fold the bottom corner up. It should stick out. This will become the pumpkin stem.

Step 18

Slightly fold each corner of the pumpkin inward to round the shape.

Step 19

Turn the model over.

Step 20

Pinch the stem to make it thinner.

Step 21

Shape the stem however you like.

Pumpkin Perfect! You Jack O’ Lantern Is Done!

That’s it! Your origami jack-o-lantern is ready to grin its way through the spooky season! It’s a great model for decorating, sharing with friends, or folding with kids.

For more fun Halloween origami and easy folding tutorials, check out our YouTube channel and sign up for our newsletter to get new ideas straight in your inbox.

Download the Complete Origami Jack O’ Lantern Printable PDF Instructions

This printable PDF is part of our Origami Friends membership on Patreon. As a member, you get access to these diagrams, our full library of printable PDFs, and member-only content.

Become an OrigaMi Friend

The post How to Fold a Origami Jack O’ Lantern appeared first on Origami.me.

With its playful shape and useful form, it also makes a charming gift or seasonal craft, especially when folded in dark purple, black, or starry-patterned paper.

The folding sequence requires a bit of precision, but it’s very accessible to anyone with a little origami experience.

The final result slips neatly over the corner of your page, with the iconic pointed hat displayed at the front, adding a touch of magic to your reading time.

Origami Witch Hat Bookmark Step-by-Step Instructions

• Difficulty: Easy – Beginner Level 3
• Folding time: 5-10 minutes

Step 1

Start with the colored side of the paper facing you. Fold and unfold both diagonals.

Step 2

Turn the paper over.

Step 3

Fold and unfold the paper in half horizontally, then vertically.

Step 4

Fold the bottom corner up to the center point.

Step 5

Collapse the model along the existing creases.

Step 6

Fold the bottom corner up to meet the top corner.

Step 7

Fold the top corner down to meet the horizontal crease. Then unfold.

Step 8

Fold the top corner down again. This time, the crease you just made should line up with the center horizontal crease.

Step 9

Flip the top right flap over to the left.

Step 10

Fold the bottom corner up to meet the top corner. Then unfold.

Step 11

Fold and unfold both left edges to the centerline. Each crease should run from the corner to the horizontal centerline.

Step 12

Fold both left edges inward at the same time, then squash the flap that’s facing you upward. Its right edge should align with the vertical centerline.

Step 13

Fold down the top edge of the flap, then swivel fold as shown.

Step 14

Fold the bottom corner up to meet the top corner.

Step 15

Flip the top left flap over to the right.

Step 16

Repeat Steps 9 to 15 on the left side.

Step 17

Tuck the bottom flap into the pocket, locking the flaps behind the hat together.

The Bewitching Hat Bookmark is Done

Folding tip: Here, I show you how to hide the flap sitting on each side of the witch hat.

Whether you’re casting spells in fiction or just curling up with a good book, this origami witch hat bookmark is a delightful companion. It’s quick to fold, fun to decorate, and guaranteed to spark a smile when you open your book.

If you’d like more tutorials like this one, join us on YouTube and subscribe to our newsletter for exclusive diagrams, folding tips, and fresh ideas delivered straight to your inbox.

Download the Complete Origami Witch Hat Bookmark Printable PDF Instructions

This printable PDF is part of our Origami Friends membership on Patreon. As a member, you get access to these diagrams, our full library of printable PDFs, and member-only content.

Become an OrigaMi Friend

The post How to Fold an Origami Witch Hat Bookmark appeared first on Origami.me.

Often used to hold small gifts or treats, this traditional origami basket is easy to fold and works beautifully as a handmade Easter basket.

Whether you fill it with mini chocolate eggs, flowers or just enjoy the folding process, it’s a lovely seasonal project perfect for adding a personal touch to your spring decorations.

Traditional Origami Basket Step-by-Step Instructions

• Difficulty: Easy – Beginner Level 3
• Folding time: 10 minutes

Paper Preparation

Step 1

Fold the paper in half horizontally, then unfold.

Step 2

Fold the right edge to the centerline, then unfold.

Step 3

Cut along the crease made in Step 2 to create a strip for the handle.

How to Fold the Handle

Step 1

Start with the white side of the paper strip facing up. Fold it in half horizontally, then unfold.

Step 2

Fold the left and right edges inward to the centerline.

Step 3

Fold the strip in half horizontally along the crease made in Step 1.

How to Fold the Basket Case

Step 1

Start with the colored side facing up, positioned like a diamond. Fold and unfold both diagonals.

Step 2

Turn the paper over.

Step 3

Fold the paper in half from side to side in both directions, then unfold.

Step 4

Collapse the paper along the creases from Steps 1 and 3 to form a Square Base.

Step 5

Fold the top layer’s top corner down to meet the bottom corner.

Step 6

Fold the top layer’s bottom corner up to the centerline.

Step 7

Lift the flap created in Step 6 and tuck the handle behind it. The handle width should align with the crease made in Step 6.

Step 8

Hold the handle in place, then fold the top two layers of the colored flap (from Step 6) in half to secure the handle.

Step 9

Repeat Steps 5 to 8 on the other side.

Folding Tip: If your handle does not extend over the flaps pointing up, place it between them so it reaches the folding area.

Step 10

Fold and unfold the top layer’s left and right corners to the centerline.

Step 11

Reverse the creases made in Step 10 inward.

Step 12

Repeat Steps 10 and 11 on the other side.

Step 13

Place your index fingers behind the handles on both sides and gently open the basket, flattening the bottom.

Step 14

Fold the two flaps sticking out of the basket inward along the dotted lines.

Folding Tip: To make this step easier, first fold them outward, then reverse the fold inward.

Your origami basket is complete!

Well done. You’ve folded a classic origami basket with a design that’s stood the test of time.

Try making a few in different colors or paper styles for your Easter table or to give as thoughtful, handmade gifts.

And if you’d like to share your paper basket, we’d love to see it. Drop a photo in the comments or tag us on social media.

Download the Complete Origami Basket Printable PDF Instructions

This printable PDF is part of our Origami Friends membership on Patreon. As a member, you get access to these diagrams, our full library of printable PDFs, and member-only content.

Become an OrigaMi Friend

The post How to Fold an Origami Basket appeared first on Origami.me.

In less than a minute, you’ll fold a handy paper bookmark that fits neatly onto the corner of your page, keeping your spot without needing to fold pages.

Choose a patterned origami paper for an eye-catching bookmark you’ll enjoy every time you open your book. A 10 cm square or smaller paper is ideal for crafting the perfect-sized bookmark.

Ready to fold? Let’s begin!

Origami Bookmark Step-by-Step Instructions

• Difficulty: Easy – Beginner Level 1
• Folding time: Less than a minute

Step 1

Start with the white side of the paper facing up in a diamond position. Fold the top corner down to meet the bottom corner, then unfold to create a horizontal diagonal crease.

Step 2

Fold the lower half of the paper vertically from left to right, then unfold.

Step 3

Fold the top corner down to meet the center crease.

Step 4

Fold the bottom corner up to meet the center crease.

Step 5

Fold the model in half along the diagonal crease from Step 1.

Step 6

Fold the bottom left edge along the dotted line so that it aligns with the central crease made in Step 2.

Step 7

Repeat Step 6 on the right side.

Step 8

Turn the model over.

Step 9

Fold the top corners down to the bottom corner, then unfold.

Step 10

Tuck the two top flaps down into the pocket.

The Completed Origami Bookmark

Great job on completing your origami bookmark!

Try experimenting with different patterns and colors to create personalized bookmarks.

Don’t hesitate to share your bookmarks with us in the comments or tag us on social media. We’d love to see your creations!

Download the Complete Origami Bookmark Printable PDF Instructions

This printable PDF is part of our Origami Friends membership on Patreon. As a member, you get access to these diagrams, our full library of printable PDFs, and member-only content.

Become an OrigaMi Friend

The post How to Fold a Very Easy Origami Corner Bookmark appeared first on Origami.me.

With just a few simple folds, you’ll create a charming 3D star that’s small enough to use as decorations, gifts, or even as part of a larger craft project.

To get started, you’ll need long, thin strips of paper—about 10 to 11 inches (25 cm) long and 3/4 of an inch (2 cm) wide for standard-sized stars. Thinner strips create smaller stars, while wider ones result in larger stars.

The key to a perfect paper star is keeping your folds neat and tight so it will puff up beautifully at the end.

Ready to fold your way to a pile of tiny origami stars? Let’s get started with this step-by-step guide!

Origami Lucky Star Step-by-Step Instructions

• Difficulty: Easy – Beginner Level 2
• Folding time: Under 5 minutes

Step 1

Start with a long, narrow strip of paper. The exact measurements are not important. Form a loop at one end of the strip.

Pull the loop through, leaving only a small strip of paper at the end.

Step 2

Flatten the loop so that it forms a pentagonal shape.

Step 3

Tuck the remaining small strip of paper under the two top layers of the loop.

Step 4

Flip the model around.

Step 5

Fold the pentagonal portion down, aligning the top left edge with the width of the long strip.

Step 6

Fold down the pentagonal portion again, aligning the top right edge with the strip. Note that the edge being aligned is different from that of Step 5.

Step 7

Continue to repeat Steps 5 and 6, alternating the edges that are lined up. Stop when there is only a small strip remaining.

Step 8

Tuck the small remaining strip under the top two layers, similar to Step 3.

Step 9

And now, the fun part! Pinch at the corners to puff up the star.

The Completed Origami Lucky Star

And there you have it—your very own 3-D paper star!

These stars add a touch of magic to any occasion. I hope you enjoyed making them and feel inspired to create dozens more.

Feel free to share your creations with us in the comments or on socials!

Download the Complete Origami Lucky Star Printable PDF Instructions

This printable PDF is part of our Origami Friends membership on Patreon. As a member, you get access to these diagrams, our full library of printable PDFs, and member-only content.

Become an OrigaMi Friend

The post How to Fold an Origami Lucky Star appeared first on Origami.me.

You’ll need two sheets of origami paper to create the spider’s body and head. While it’s more advanced, it’s a rewarding way to improve your craft, and we’re here to help you every step of the way.

In just under 30 minutes, you’ll create a paper spider that’s perfect for adding a spooky touch to your decor. Let’s get folding!

Modular Origami Spider Step-by-Step Instructions

• Difficulty: Low-Intermediate
• Folding time: 20-30 minutes

Step 1

Start with the white side of the paper up. Fold and unfold in half.

Step 2

Fold and unfold in half the other way. Then, turn the paper over.

Step 3

Fold and unfold along the diagonals.

Step 4

Rotate the paper 45° counterclockwise. Then, turn it over.

Step 5

Collapse along the existing creases to form a Square Base.

Step 6

Lift the top right flap and Squash fold it flat.

Step 7

Turn the model over and repeat Step 6 on the other side.

Step 8

Repeat Step 6 on the two remaining flaps.

Step 9

Fold and unfold the left and right edges to the centerline.

Step 10

Use the creases from Step 9 to make a Petal fold.

Step 11

Turn the model over and repeat Step 10 on the other side.

Step 12

Repeat Step 10 on the remaining flaps.

Step 13

Rotate the model 180°.

Step 14

Fold the top triangle up. Then, gently pull the two top flaps apart to open the triangular flap.

Step 15

Push down the center and sink the triangular flap into the pocket. You are reversing the triangle creases to perform an open sink.

Step 16

Turn the model over and repeat Steps 14 to 15 on the other side.

Step 17

Repeat Steps 14 to 15 on the remaining flaps.

Step 18

Fold the top left and right edges to the centerline. Turn the model over and repeat on the other side.

Step 19

Repeat Step 18 on the remaining flaps.

Step 20

Inside reverse fold the top flaps along the dotted lines. Turn the model over and repeat on the other side.

Step 21

Pull one pair of legs downward and flatten them.

Step 22

Mountain fold the legs downward along the dotted lines.

Folding tip: You can also outside reverse fold the legs. However, a double-sided paper is recommended to avoid having white gaps.

Step 23

Blow gently into the hole to puff up the body.

Step 24

Create another Frog Base by repeating Steps 1 to 12 on a new sheet of paper.

Step 25

Fold the top triangular flap up. Then, repeat on the other side.

Step 26

Flip the top right flap to the left and repeat Step 25. Then, repeat on the remaining flaps.

Step 27

Pleat the left and right top flaps behind the front layers. Repeat on the other side, folding at a slightly higher angle.

Step 28

At the level of the front layers, fold the body and leg edges to the centerline. Start folding from the top down, creating a swivel fold at the junction. Repeat on all remaining sides.

Step 29

Mountain fold the legs upward along the dotted lines.

Folding tip: Again, you can also outside reverse fold the legs. However, a double-sided paper is recommended to avoid having white gaps.

Step 30

Insert the finished top half into the bottom half.

Folding tip: Fold the long flap in half to make the insertion easier.

The completed origami spider Enjoy your new eight-legged friend!

Shaping Tip: Bring your origami spider to life

The video tutorial below goes beyond the basics, showing you how to shape and refine the spider for a more lifelike look. With a few extra tweaks, your spider will take on a new level of detail.

Congratulations on folding this spider!

Your origami spider is a true achievement, with each fold adding to its intricate, lifelike design. Display it proudly or add it to a spooky-themed setup for extra flair.

Don’t hesitate to share your creations with us in the comments or on socials. We’d love to see them!

Download the Complete Origami Spider Printable PDF Instructions

This printable PDF is part of our Origami Friends membership on Patreon. As a member, you get access to these diagrams, our full library of printable PDFs, and member-only content.

Become an OrigaMi Friend

The post How to Fold an Origami Spider appeared first on Origami.me.

It is used to store small gifts or treats during festivals and ceremonies, like kagami mochi for New Year’s, beans for Setsubun, and dango for Tsukimi.

With its unique design and interesting raised base, this project provides an easy step-by-step guide to folding your own ceremonial box, perfect for decoration or special occasions.

Origami Sanbo Box Step-by-Step Instructions

• Difficulty: Easy – Beginner Level 3
• Folding time: 5-10 minutes

Step 1

Start with the white side of the paper facing up. Fold in half both horizontally and vertically, then unfold.

Step 2

Fold each corner to the center.

Step 3

Fold both diagonals, then unfold.

Step 4

Turn the model over and fold both sides in half. Then unfold.

Step 5

Using the existing folds, collapse along the dotted lines.

Step 6

Bring the top flap down and fold it in half. Then unfold.

Step 7

Open the top layer pockets and bring the top corner down to meet with the lower corner, creating a squash fold.

Step 8

Repeat Steps 6 to 7 on the other side of the model.

Step 9

Bring the top right flap to the left, then repeat on the other side.

Step 10

Fold both top layers in half along the dotted lines.

Step 11

Repeat Step 10 on the other side of the model.

Step 12

Bring the top flap down and fold along the dotted line. Repeat on the other side.

Step 13

Gently pull the flaps created in Step 12 outward to open the box.

Folding tip: Use your fingers to press the paper down and shape the inside of the box.

The Completed Sanbo Box

Great job on folding your very own origami sanbo box! It’s a timeless piece rich with tradition.

Keep experimenting with different papers and enjoy the beauty this box adds to any place.

We’d love to see your creations! Share them with us in the comments or on socials.

Download the Complete Origami Sanbo Box Printable PDF Instructions

This printable PDF is part of our Origami Friends membership on Patreon. As a member, you get access to these diagrams, our full library of printable PDFs, and member-only content.

Become an OrigaMi Friend

The post How to Fold an Origami Sanbo Box appeared first on Origami.me.

Let’s bring a bit of that beauty indoors with an easy traditional origami leaf.

This model is perfect for complete beginners, offering simple step-by-step instructions on how to fold a paper leaf.

Traditional Origami Leaf Step-by-Step Instructions

• Difficulty: Easy – Beginner Level 2
• Folding time: Less than 5 minutes

Step 1

Start with the colored side facing up and fold it in half diagonally.

Step 2

Fold along the dotted lines to create the leaf stem.

Folding tip: You can adjust the width of the fold to make a larger or thinner stem.

Step 3

Bring down the top corner and fold along the dotted line. The size of the paper strip can vary.

Step 4

Bring the corner up and fold the paper to align with the bottom edge of the lower layer.

Step 5

Again, fold the corner down to align with the top edge of the lower layer.

Step 6

Again, fold the corner up to align with the top edge of the lower layer.

Step 7

Repeat folding the model up and down until you reach the top part.

Step 8

Stretch the model by unfolding steps 3 to 7.

Step 9

Fold the top layer of the model along the dotted line at the bottom right corner.

Step 10

Repeat on the other side.

Step 11

Lift open the top layer.

The Completed Origami Leaf

Well done! You’ve just made your very own origami leaf.

Whether you use it for decorating, as part of a seasonal craft project, or simply to celebrate this time of year, your paper leaf brings a touch of nature’s charm into your home.

I hope you enjoyed folding with us! Feel free to share your creations with us in the comments or on socials.

Download the Complete Origami Leaf Printable PDF Instructions

This printable PDF is part of our Origami Friends membership on Patreon. As a member, you get access to these diagrams, our full library of printable PDFs, and member-only content.

Become an OrigaMi Friend

The post How to Fold a Traditional Origami Leaf appeared first on Origami.me.

This origami snail is an interesting project that fits the season’s mood, with the soft rain outside and the golden leaves scattered on the ground.

While this paper snail is suitable for beginners, it’s definitely more challenging than other beginner models, like the origami leaf.

The step-by-step instructions will guide you through interesting folds. You’ll be swirling the paper to create the antennae and stretching the paper to make the snail’s shell.

Origami Snail Step-by-Step Instructions

• Difficulty: Easy – Beginner Level 5
• Folding time: 15 minutes

Step 1

Start with the colored side of the paper facing up. Fold and unfold both diagonals.

Step 2

Turn the paper over and fold it horizontally and vertically in half. Then unfold.

Step 3

Rotate the paper 45 degrees clockwise. Then, fold along the dotted lines using the existing creases to create a square base.

Step 4

Fold and unfold the right flap to the center line.

Folding tip: If you’re already familiar with squash folds, you can skip this step.

Step 5

Open the right flap and squash fold using the creases made in Step 4.

Fold This Snail with Our Free Pattern!

By sharing your email, you’ll join our mailing list. We promise no spam and total privacy—just origami inspiration.

Step 6

Repeat Steps 4 and 5 three more times on all sides.

Step 7

Fold the right flap along the dotted line so the angle is reduced by about one-third.

Step 8

Fold the top flap’s right edge to meet the centerline.

Step 9

Fold the top left flap in half so its left edge lines up with the centerline.

Step 10

Once again, fold the top left flap in half so its left edge lines up with the centerline.

Step 11

Turn the model over and repeat Steps 7 to 10.

Step 12

Flip the top left flap over to the right side, then repeat on the other side.

Step 13

Repeat Steps 7 to 10 on both sides. This time:

• On the left flap, fold it into thirds by making two equal folds. Each fold turns in about one-third of the angle.

• On the right flap, fold it into thirds too, but do it by folding in half twice.

Step 14

Flip the top right flap over to the left side, then repeat on the other side.

Step 15

Now focus on the top of the model. Carefully make an inside reverse fold on each of the two side flaps. These will become the snail’s antennae.

Step 16

On each side, tuck the two center flaps inward so they’re hidden inside the model.

Step 17

Gently lift the snail’s antennae so they point forward, in front of the head. Then, fold the bottom corner upward along the dotted line. This will make the shell stand upright.

Step 18

Swirl and shape the antennae however you like.

Step 19

Gently open and stretch the vertical layers until they puff out like a balloon. This will form the snail’s shell.

Folding tip: Go slowly here. Use both hands to shape the shell evenly without tearing the paper. A little patience makes a big difference!

Shell Yeah! You Completed the Snail!

Well done! You’ve just made your very own origami snail.

Whether you’re using it for decorating, adding to your collection, or simply enjoying a peaceful activity on a rainy afternoon, your paper snail brings a touch of nature indoors.

Thanks for taking the time to fold with me. Don’t hesitate to share your creations with us in the comments or on socials.

Download the Complete Origami Snail Printable PDF Instructions

This printable PDF is part of our Origami Friends membership on Patreon. As a member, you get access to these diagrams, our full library of printable PDFs, and member-only content.

Become an OrigaMi Friend

The post How to Fold an Origami Snail appeared first on Origami.me.